Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

💬 MyPulse Sensor

openhardware.io last edited by openhardware.io

https://www.openhardware.io/view/352/MyPulse-Sensor
Reply Quote 0
1 Reply Last reply
miljume last edited by

Nice work! Can you please upload the STL file as well?
Reply Quote 0
1 Reply Last reply
scalz Hardware Contributor last edited by

just received and assembled this tiny pcb

So i've updated projects files (git and here) with some pics, and stl. STL are wip but as you can see it perfectly fits.
Reply Quote 1
1 Reply Last reply
miljume last edited by

The electronics work perfect in the TH version but it seems like the enclosure is too small for it to fit.
I needed to carve a bit both on the bottom and lid to be able to mount them together
Reply Quote 1
1 Reply Last reply
scalz Hardware Contributor last edited by

oki.
i'll improve this when i'll get a bit more time, that's quick to do. I've assembled smd version only so far.
thx for feedback
Reply Quote 0
1 Reply Last reply
xydix last edited by

Hi. Thank you for sharing your board. It seems awesome. I got a question. When I read the BOM, I think I should use 100 ohm, 330 ohm and 1500 ohm resistor. When I look at the schematic picture it says 100k 330k. What resistor should I use?
Reply Quote 1
1 Reply Last reply
xydix last edited by @scalz

@scalz
I guess you have the answer to that question?
Reply Quote 0
1 Reply Last reply

7
Posts

1940
Views

Suggested Topics

Connect humidity sensor to OpenHAB
OpenHAB • sensor humidity openhab openhab mqtt connecting • • vladimir

4

0
Votes

4
Posts

3153
Views

@vladimir No, I use a WIZ5100 module. Search the forum. Many users (try) :-)) to use ENC28J60.
Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

33

0
Votes

33
Posts

13722
Views

@BulldogLowell said: @mntlvr said: And if all six switches are set to gnd the total current would only be 1.5 ma (5volts /20k)x6=.0015 amps I believe. the internal pullup resistors are 20k-50k according to arduino spec. yeah, I know, but if you are underpowered already (the radio....) the extra draw may create an issue... who the heck knows. I'll try on one of mine when I get the chance... your code works, and that's a treat, but now I need to understand why the simpler execution of the same code doesn't seem to cooperate with your rig. weird... you code with pinMode(buttonPin[i], INPUT); exactly same board and USB power supply and same transceiver, here are the results Sending device info...sensor started, id 32 send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1 send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0 read: 0-0-32 s=255,c=3,t=6,pt=0,l=1:I send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.15 Setting up Pin0 send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin1 send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin2 send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin3 send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: Setting up Pin4 send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: Setting up Pin5 send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok: read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch Sensor presentation complete send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1 Pin 3 changed state... New State: Tripped send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1 Pin 0 changed state... New State: Tripped send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1 Pin 1 changed state... New State: Tripped send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1 Pin 2 changed state... New State: Tripped send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:0 Pin 3 changed state... New State: Not Tripped
💬 Temperature-Humidity-Pressure Sensor
OpenHardware.io • arduino temperature esp8266 sensor humidity raspberry pi esp32 pressure • • openhardware.io

6

0
Votes

6
Posts

1185
Views

Advantage of this sensor is fast and easy installing by the non qualified personal. The sensor is designed for large agriculture facility with many greenhouses where is needed to be controlled temperature and humidity, the atmospheric pressure is for control the motor of air inlet and outlet. With help of the sensor installed outside the greenhouse provide information about positive/negative pressure inside the greenhouse. Finlay the software read accurate temp/humid value of the Si7021, and only atmospheric pressure of BMP180, the temperature sensor inside the BMP180 is used only by the sensor itself to provide accurate atmospheric pressure measurements. The sensor can be used also for home automation, and drone applications where is needed correction of the UAV barometric sensor compared to the ground barometric sensor, also humidity measurement can help the pilot to calculate more accurate flying time.
Motion Sensing sketch which is also a repeater
Troubleshooting • sensor motion repeater sketch • • Dean

5

0
Votes

5
Posts

3275
Views

Hey guys, I was justing wondering, is there a way to deactivate the motion sensor if not being used? Eg: My motion sensors are connected to Homeseer and they show up as sensors but I was wondering if I could have an ON / OFF control to deactivate or active the motion as needed.
Temperature Sensor Configuration
General Discussion • temperature sensor • • rdevine

9

0
Votes

9
Posts

4003
Views

I apologize for the questions and how simple they may be, as Im new to this community but very intrigued with the creativity and endless possibilities.

💬 MyPulse Sensor

Suggested Topics

Connect humidity sensor to OpenHAB
OpenHAB • sensor humidity openhab openhab mqtt connecting • • vladimir

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

💬 Temperature-Humidity-Pressure Sensor
OpenHardware.io • arduino temperature esp8266 sensor humidity raspberry pi esp32 pressure • • openhardware.io

Motion Sensing sketch which is also a repeater
Troubleshooting • sensor motion repeater sketch • • Dean

Temperature Sensor Configuration
General Discussion • temperature sensor • • rdevine

30
Online

11.7k
Users

11.2k
Topics

113.0k
Posts

💬 MyPulse Sensor

Suggested Topics

Connect humidity sensor to OpenHAB OpenHAB • sensor humidity openhab openhab mqtt connecting • • vladimir

Binary Control Modules , Switches, or Outlets on a Vera Edge My Project • sensor • • mntlvr

💬 Temperature-Humidity-Pressure Sensor OpenHardware.io • arduino temperature esp8266 sensor humidity raspberry pi esp32 pressure • • openhardware.io

Motion Sensing sketch which is also a repeater Troubleshooting • sensor motion repeater sketch • • Dean

Temperature Sensor Configuration General Discussion • temperature sensor • • rdevine

30Online

11.7kUsers

11.2kTopics

113.0kPosts

Connect humidity sensor to OpenHAB
OpenHAB • sensor humidity openhab openhab mqtt connecting • • vladimir

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

💬 Temperature-Humidity-Pressure Sensor
OpenHardware.io • arduino temperature esp8266 sensor humidity raspberry pi esp32 pressure • • openhardware.io

Motion Sensing sketch which is also a repeater
Troubleshooting • sensor motion repeater sketch • • Dean

Temperature Sensor Configuration
General Discussion • temperature sensor • • rdevine

30
Online

11.7k
Users

11.2k
Topics

113.0k
Posts