@scalz
in the second test i used that getting started code to test the radio modules with a library other than mysensors. and they worked. (That code is not mine, i suppose it use the maniacbug library).
So i did investigate to find the differences between mysensors and that library. Only after replacing, in mysensors, the enablefeatures with that code, i got the communication gw-node.
@sundberg84
I also on my last work removed the LG33, it's faster
Well this most likely have been provided as info, but else it's here:
Remember to burn new OPTIBOOT 8MHz into the Arduino Pro Mini
and then I also use avrdude with a usbtinyISP to set the fuse to not check battery voltage monitoring, this is done after I have flashed this with Arduino IDE
avrdude -c usbtiny -p m328p -U efuse:w:0x07:m```
I am not able to install the Library . I am getting Error
Invalid library found in C:\Documents and Settings\User\My Documents\Arduino\libraries\ESP8266MQTTMesh: C:\Documents and Settings\User\My Documents\Arduino\libraries\ESP8266MQTTMesh.
I changed the name of the zipped file to ESP8266MQTTMesh as the name of .cpp file ESP8266MQTTMesh.cpp. Still it is saying Invalid Library found in ....
What could be the problem.
When you read the data sheet correctly you can see, that the distance between the pins is different for a AA and AAA battery holder. That`s why I was asking if somebody can recommend a holder that fits.
