Topics created by C.r.a.z.y.

@celonunes generally raspberry pi with serial usb but also you can see some mqtt logs. Same problem with mac os with serial usb. I also tried rpi uart pins for serial bu there is no logs for it. Maybe someone gives his Openhab dir i can understand better problem isnt related with hardware

@funky81 Hek can make better but he didnt understand as you see

New master file didn't make difference. When i see "fail" i can't change the state with original RelayWithButtonActuator sketch. Ok id is not "0" now.

@BulldogLowell That's it! Thank you if (message.sensor==1 && message.getBool()==true) {....

@C.r.a.z.y. yeah.... those are VERY bouncy. are you interrupt triggering or just using a state change? post your code, let's make sure you have it de-bounced enough.

@C.r.a.z.y. is this confirm? coz i'm having the same problem. and Yes, i'm using serial for my gateway and usb for my sensor. Please share if there's possible answer for this problem. thanks

@justinthegeek Also 1.4

Yes, you must copy the openhab/webapps/ directory habmin, and org.openhab.io.habmin. - ****.jar file copy the openhab/addons directory. Then http://localhost:8080/habmin/index.html this address must be available to the administration. If I remember correctly, it is up to version 1.6 of the work for me. Currently I am using 1.5.1. (Sorry for my english)

@C.r.a.z.y. I usually add store links directly from the build pages that is related to the example. On the main "store" there is a lot of items just for inspiration. Not all have ready-to-use MySensors Arduino examples.

@C.r.a.z.y. yes, connect the 6V battery to the RAW pin, not Vcc...

Thank you all. I tried to use vcc ang gnd for 5v servo with two nanos. When i couldn't see serial port i opened a new one and followed this : http://sysexit.wordpress.com/2013/02/07/burning-a-bootloader-to-an-arduino-nano-using-another-arduino/ also http://www.instructables.com/id/How-To-Burn-a-Bootloader-to-Clone-Arduino-Nano-30/3/?lang=es My new opened nano also died after bootload. After this i tried with uno as programmer, it installed ISP and 2 of nano is blinking like new one but no serial. Other 2 nano didn't burn; avrdude: Device signature = 0xffff00 avrdude: Expected signature for ATmega328P is 1E 95 0F Double check chip, or use -F to override this check. avrdude: Send: Q [51] [20] avrdude: Recv: . [14] avrdude: Recv: . [10] avrdude done. Thank you. Error while burning boot loader. 4.nano was in vera. I don't remember how i loose it Now i will go and get 2 more nano. I have to use one of it with vera. Also i will buy 2 raspberry b+ and cameras and a clone yün to try some intercom action. I want to use other raspberry with openhab or pidome...

I changed imp file to I_ArduinoNode1.xml because it was blank than i saw same problem : stopping MySensors Plugin[43] : Running Lua Startup. Now its blank again and no problem with Lua

I can nothing say about OpenHAB or PiDome but: Started! 0;0;3;0;9;read: 0-0-0 s=0,c=0,t=0,pt=0,l=0: 0;0;3;0;9;version mismatch 0;0;3;0;9;read: 0-0-0 s=0,c=0,t=0,pt=0,l=0: 0;0;3;0;9;version mismatch Does not look good, it seems an error from the gateway.

yes ....