Topics created by Takero

@DavidZH great, thanks for verifying! I have created an issue on github https://github.com/mysensors/MySensors/issues/758

I does not work again . . . i dont know why After Upload new Firmware, the device wont reboot and hanging in an bootloop. Log from MYSController: [2016-10-29 14:30:37.589 Info] RX 0;255;3;0;9;TSP:MSG:SEND 0-0-50-50 s=255,c=4,t=3,pt=6,l=22,sg=0,ft=0,st=ok:6400020001000C941F040C941F040C9409140C941F04 [2016-10-29 14:30:37.602 Info] RX 0;255;3;0;9;TSP:MSG:READ 50-50-0 s=255,c=4,t=2,pt=6,l=6,sg=0:640002000000 [2016-10-29 14:30:37.612 Info] TX 50;255;4;0;3;6400020000000C94F7030C94A3190C947C190C941F04 [2016-10-29 14:30:37.622 Info] RX 50;255;4;0;2;640002000000 [2016-10-29 14:30:37.641 Info] RX 0;255;3;0;9;TSP:MSG:SEND 0-0-50-50 s=255,c=4,t=3,pt=6,l=22,sg=0,ft=0,st=ok:6400020000000C94F7030C94A3190C947C190C941F04 [2016-10-29 14:30:40.031 Info] RX 0;255;3;0;9;TSP:MSG:READ 50-50-255 s=255,c=3,t=7,pt=0,l=0,sg=0: [2016-10-29 14:30:40.046 Info] RX 0;255;3;0;9;TSP:MSG:BC [2016-10-29 14:30:40.060 Info] RX 0;255;3;0;9;TSP:MSG:FPAR REQ (sender=50) [2016-10-29 14:30:40.069 Info] RX 0;255;3;0;9;TSP:CHKUPL:OK [2016-10-29 14:30:40.077 Info] RX 0;255;3;0;9;TSP:MSG:GWL OK [2016-10-29 14:30:40.576 Info] RX 0;255;3;0;9;!TSP:MSG:SEND 0-0-50-50 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0 [2016-10-29 14:30:40.594 Info] RX 0;255;3;0;9;TSP:MSG:READ 50-50-255 s=255,c=3,t=7,pt=0,l=0,sg=0: [2016-10-29 14:30:40.606 Info] RX 0;255;3;0;9;TSP:MSG:BC [2016-10-29 14:30:40.615 Info] RX 0;255;3;0;9;TSP:MSG:FPAR REQ (sender=50) [2016-10-29 14:30:40.624 Info] RX 0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL) [2016-10-29 14:30:40.633 Info] RX 0;255;3;0;9;TSP:MSG:GWL OK [2016-10-29 14:30:40.643 Info] RX 0;255;3;0;9;TSP:MSG:SEND 0-0-50-50 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=ok:0 [2016-10-29 14:30:40.653 Info] RX 0;255;3;0;9;TSP:MSG:READ 50-50-255 s=255,c=3,t=7,pt=0,l=0,sg=0: [2016-10-29 14:30:40.662 Info] RX 0;255;3;0;9;TSP:MSG:BC [2016-10-29 14:30:40.673 Info] RX 0;255;3;0;9;TSP:MSG:FPAR REQ (sender=50) [2016-10-29 14:30:40.682 Info] RX 0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL) [2016-10-29 14:30:40.692 Info] RX 0;255;3;0;9;TSP:MSG:GWL OK [2016-10-29 14:30:40.774 Info] RX 0;255;3;0;9;!TSP:MSG:SEND 0-0-50-50 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0 [2016-10-29 14:30:40.784 Info] RX 0;255;3;0;9;TSP:MSG:READ 50-50-255 s=255,c=3,t=7,pt=0,l=0,sg=0: [2016-10-29 14:30:40.794 Info] RX 0;255;3;0;9;TSP:MSG:BC [2016-10-29 14:30:40.806 Info] RX 0;255;3;0;9;TSP:MSG:FPAR REQ (sender=50) [2016-10-29 14:30:40.815 Info] RX 0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL) [2016-10-29 14:30:40.825 Info] RX 0;255;3;0;9;TSP:MSG:GWL OK [2016-10-29 14:30:41.089 Info] RX 0;255;3;0;9;!TSP:MSG:SEND 0-0-50-50 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=fail:0 [2016-10-29 14:30:41.110 Info] RX 0;255;3;0;9;TSP:MSG:READ 50-50-255 s=255,c=3,t=7,pt=0,l=0,sg=0: [2016-10-29 14:30:41.120 Info] RX 0;255;3;0;9;TSP:MSG:BC [2016-10-29 14:30:41.129 Info] RX 0;255;3;0;9;TSP:MSG:FPAR REQ (sender=50) [2016-10-29 14:30:41.139 Info] RX 0;255;3;0;9;TSP:CHKUPL:OK (FLDCTRL) [2016-10-29 14:30:41.148 Info] RX 0;255;3;0;9;TSP:MSG:GWL OK Any Tips?

Thanks! I dont know why, it works before update. I just increase the capacitor to 500uF and it works like a charm.

hello. Yes you can. I advice you to read this great guide for more infos : https://www.mysensors.org/about/signing

@derwish said: @Takero Microsoft has updated the ASP.NET framework. I will soon make a port on it. I hope they fixed this bug. reply Then is soon? Alternativ i will try an other OS for my RPi

In my case, the most important things for a successful communication are: A good 3.3V power source (I used an adapter for nrf24l01 + with AMS1117); A 10uF capacitor (very important). In my case a 4.7uF capacitor was sufficient to pilot the nrf24l01 + PA + LNA at RF24_PA_LOW level.

Thanks for help. . . i dont now why but it works now. I Think i had an Hardware issues Thanks!