completely remove MySensors integration for HA and start over
-
I am trying to completely redo the integration. The current integration works, but I am unable to have nodes as part of the gateway. I hoping that starting over from scratch might work. 1st I stop the MySgw. then I delete the integration. This does not delete the persistent data; using Studio Code Server, I delete MySensors data. Next I delete the MySensors topics from the MQTT broker. Finally, I reboot Home Assistant. (In terminal execute reboot) when the reboot is complete, I re-integrate MySensors, ensuring that the version, "in" topics and "out" topics are identical to the MySgw. Then I restart the gateway. The data is getting the MQTT broker, but not to HA. Of course I backed up before doing this and when I do the full restore, all is working as it was before. I expect I should be able to start from scratch. What am I doing wrong?
-
@OldSurferDude I posted this question in the Home Assistant forum, too. I figured it out! See my post in HA
OSD
Suggested Topics
-
W5100 Ethernet Gateway in Release 2.5.0-1
Troubleshooting • 31 Jan 2020, 14:33 • chrkir 31 Jan 2020, 14:33 -
Problem with ethernet gateway
Troubleshooting • 21 Dec 2014, 21:19 • oded00 6 Feb 2020, 16:04 -
Wiring Help
Troubleshooting • 12 Mar 2015, 00:27 • Chaotic 13 Mar 2015, 23:03 -
Forum Theme Problems
Announcements • 8 Apr 2014, 07:05 • hek 8 Apr 2014, 07:05 -
How to change Radio ID on Raspberry Pi Gateway with RFM 69
Troubleshooting • 1 Jul 2020, 20:12 • Stefan_NE 2 Jul 2020, 11:05 -
Forum Banner on Screen
General Discussion • 30 Sept 2015, 23:16 • 5546dug 17 Feb 2017, 22:55 -
💬 Raspberry Pi gateway interface
OpenHardware.io • 14 Apr 2017, 08:53 • openhardware.io 17 Jul 2022, 22:45 -
Trouble with 115200 baud on 3.3V/8MHz Arduino, like Serial Gateway. Solution: Change baudrate.
Troubleshooting • 1 Jun 2015, 20:00 • Stric 3 Jun 2015, 05:21