Ethernet gateway doesn't work with Domoticz.

[kunall]

Hello,

I wanted to report my or some other members issues with Ethernet Gw and Domoticz. It seems that Ethernet gateway only works one way and not other with Domoticz.
I was able to get status updates on Domoticz via Ethernet gateway but I couldn't send any command to any nodes.
Ex. I could see all the sensor data, relay's physical button status update but I could not send a on/off command to the relay. There's just no response from Ethernet Gw if issues a command from Domoticz UI.

I tested serial gateway, it worked without any issue.

Thanks!

[hek]

You might get luckier by reporting this over at the Domoticz forum/issue tracker.

[kunall]

@hek You mean this isn't an issue with the ethernet gateway but Domoticz itself? I will open a support ticket with domoticz. Thanks!

[hek]

You ether got one way communication (which should be visible in serial monitor) or Domoticz somehow have problems sending out commands over ethernet.

[Striffster]

@kunall Please post a note here if you will get any solution from Domoticz.

[kunall]

@hek Thats right, I only get one way communication. Domoticz doesn't send cmd via Ethernet for some reason.

[kunall]

@Striffster I surly will.

[sundberg84]

I have a ethernet gw with domoticz. Im having problem with incoming battery level is added to the wrong node. I will try to re-compile with some new log commands. If there is any you want me to add let me know and i can try to debug.

[andriej]

@sundberg84 I've seen it should be fixed lately - check domoticz's commits at: http://sourceforge.net/p/domoticz/code/commit_browser

[HenkeP]

@sundberg84 @andriej, I'm running MySensors using serial gateway on Domoticz and saw the same issue but it got fixed just recently and it seems to work on the latest Beta which I'm running.

[sve]

I have created a topic in the forum before, with tcpdump examples.
http://www.domoticz.com/forum/viewtopic.php?f=6&t=6112

But the problem is still there, hopefully soon fix.