Hijack a motion detector - hardware?

[sundberg84]

Hi!

I have a motion detected lamp in the garden.
I want to hijack the motion detector and connect it to my network.

What hardware can i use to connect and read if there is motion?

I guess its some sort of current sensor, because i cant direct connect it to Arduino since voltage is to high.
http://www.ebay.com/itm/INA219-I2C-Bi-directional-DC-Current-Power-Supply-Sensor-Breakout-Module-DIY-/331625224459?hash=item4d3667590b ??

Br

[AWI]

@sundberg84 LDR or light sensor? (at least cheaper..)

[sundberg84]

Yea, but i guess it will register motion during daytime?

Any ideas?

[Dwalt]

@sundberg84 Did you see this post?

[johnr]

You can use an optocoupler, I have done so to read an 12V signal from my alarm system. Check CNY17 for example.

[sundberg84]

@johnr

Cool! I will try and get back here with my findings Tnx!