DHT22 Sensor Issue, Maybe Sketch?
-
Created a test sensor with the base humidity sketch on MySensors, using a DHT22. Initially the device is recognized and appears to work, however after a day of use I see that the temperature reading is not being updated. Also, a second sensor on the same node has appeared, with what appears to be incorrect humidity, and temperature that is being translated to F from my already set point of F. This is giving me readings of 160+, when I should be in the 70's. Pictures attached. Not sure where to go from here.
http://www.mysensors.org/build/humidity
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login