Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

NRF24L01 and rfm69 in one gateway

Omemanti last edited by

Hey There,

Now I got multiple sensors using a NRF24L01. I'm of to a new journey, the rfm69.

Is there a way to combine bothe radios in one gateway?
I use an esp8266(node-UMC) with NRF24L01. Haven't got a spare esp lying around..

Thnx!
Reply Quote 0
1 Reply Last reply
mfalkvidd Mod last edited by @Omemanti

@Omemanti sorry, only one transport type per gateway is supported.

Maybe you have a spare Arduino to create a serial gateway?

In either case I would recommend ordering a few esp. I use the wemos d1 mini version. Cheap and easy to use
Reply Quote 0
1 Reply Last reply
Omemanti last edited by @mfalkvidd

@mfalkvidd oké, clear!
Unfortunate.
Guess a couple esp8266 couldn't hurt.
Reply Quote 1
1 Reply Last reply

gateway 101 nrf24 15 rfm69hw 12

3
Posts

1593
Views

Log in to reply

Suggested Topics

Gateway for Pachube Or Mysql Database
Feature Requests • arduino gateway server mysql pachube • • legeantvert

6

0
Votes

6
Posts

4700
Views

@legeantvert said: On the same way, i dont understand how and where are stored the values inside the gateway if not used on each reception, are they stored somewhere to be able to answer them when serial request arrive? You could bypass this on some kind of events obviously ! Actually my perl gateway is acting as the server Vera is for the arduino gateway. So from there I can trigger external URL, store data in a sqlite3 database... and so on !
Wiring Help
Troubleshooting • gateway mqtt broker gat • • Chaotic

4

0
Votes

4
Posts

2101
Views

You're right. Updated codebender library just now to the most recent on github/master Not sure if codebender autodetects this if you already cloned it to your local account.
💬 Usb serial Mysensors Gateway
OpenHardware.io • mysensors gateway mysensor passerelle de mysensors • • openhardware.io

1

0
Votes

1
Posts

259
Views

No one has replied
💬 MySRaspiGW - MySensors Raspberry Pi GPIO Gateway
OpenHardware.io • gateway nrf24l01 raspberry smd gpio • • openhardware.io

11

0
Votes

11
Posts

3678
Views

Okay, finally got the original nrf24l01 SMD modules with the square chip visible... As exptected, things work just fine now, so the culprit of my issues was really the incompatible/fake "nrf24l01" SMD modules with the epoxy blob. If you want to use normal nrf24l01+ modules together with this smd gateway, DO NOT USE the smd module with the epoxy blob, as they won't work. Using only the fake SMD modules might work, too, but mixing the fake modules with real ones does not work.
Do we have any option to bridge NRF24L01 and RFM69?
General Discussion • gateway rfm69 nrf24l01+ repeater bridge • • jkandasa

5

0
Votes

5
Posts

1339
Views

@jkandasa Any news here? (still have my rfm69 Boards here to check of the range is much better)
Raspberry Pi Zero WH as gateway?
Hardware • gateway mqtt raspberry • • sentur

2

0
Votes

2
Posts

2424
Views

@sentur since it was launched 6 days ago, I seriously doubt anyone has had the ability to try it. Anyway, please don't post the same question in multiple places. It wastes people's time. Most users don't have as much time as they would like to spend on projects, and wasting their time by splitting the discussion to multiple threads isn't very nice. In case anyone wants to follow the existing discussion, head over to https://forum.mysensors.org/post/84076
Parallel Gateways
General Discussion • arduino gateway raspberry pi • • jocke4u

10

0
Votes

10
Posts

54
Views

@jocke4u I run 2 RF gateways and it's not a problem. When you 'migrate' a node to a new gateway make sure to run the mysensors clear eeprom sketch first to get rid of the old routing table or you might have issues.
My NRF24 Gateway and Nodes were working fine for 2 days then everything stopped!!!
Troubleshooting • gateway broken stfail read and drop • • micah

10

0
Votes

10
Posts

3427
Views

@micah said: @sundberg84 said: Hard to say. St:fail generally means that you don't get ack from the receiver. This is normally range, power or hardware. There is not a general fix for this but you need to try and learn... i admit its strange I worked for some days. Maybe a radio fried ? Don't have the radios to close to eachother. Try a.couple of meters. Sorry I'm out of more solid ideas. Hey sundberg84, quick question for you. If you look at my debug logs above it looks like the gateway is infact receiving the message but the node thinks it fails. Con you confirm my interpretation of the following two lines? NODE DEBUG send: 42-42-0-0 s=1,c=1,t=0,pt=7,l=5,sg=0,st=fail:20.0 GATEWAY DEBUG 0;255;3;0;9;read: 42-42-0 s=1,c=1,t=0,pt=7,l=5,sg=0:20.0 If that's correct, could that change what the issue might be? Yes, I saw that - it seems to work one way but the ack (return) does not reach back. So its on the edge. But this should update the value in your controller.

0
Online

11.4k
Users

11.1k
Topics

112.6k
Posts

Copyright 2019 Sensnology | Forum Guidelines | Privacy Policy | Terms of Service

1 / 1