Connect humidity sensor to OpenHAB
-
Hello!
Please help to deal with the humidity sensor (http://www.mysensors.org/build/humidity) connection to OpenHAB through MQTT gateway (http://www.mysensors.org/build/mqtt_gateway). I just started to deal with OpenHAB and MySensors. Unfortunately, I do small experience to do everything on their own, and there is no documentation in my language.
-
@vladimir I had the same problem. Very helpful for me is the MQTT-client MQTT.fx. It shows you the messages from your gateway.
See my post: http://forum.mysensors.org/topic/953/how-to-know-the-node-ids-assigned-by-the-mqtt-gateway-to-the-sensors
-
@Xander, thank you for your answer! As it turned out, I have a problem in the gateway. I use a network module ENC28J60, and full of reason to it do not reach the packets, it is not visible on the network. I connect it directly to a computer. Maybe you and repel such a problem?
-
@vladimir No, I use a WIZ5100 module. Search the forum. Many users (try) :-)) to use ENC28J60.
Suggested Topics
-
💬 MDMSMotion
OpenHardware.io • 21 Feb 2019, 16:35 • openhardware.io 21 Feb 2019, 16:35 -
Custom Interrupt routine for door sensor
Development • 11 Jan 2015, 16:27 • funksoulbrother 11 Jan 2015, 22:00 -
How to monitor the foliage Evapotranspiration with arduino
General Discussion • 27 Mar 2019, 21:00 • pierrot10 29 Mar 2019, 13:11 -
Humidity example sketch not working
Troubleshooting • 27 Sept 2014, 20:59 • ajachierno 4 Oct 2014, 03:01 -
💬 GPS Sensor
Announcements • 15 Dec 2016, 21:31 • hek 21 Mar 2017, 08:19 -
💬 simple MySensors MultiSensor Board
OpenHardware.io • 2 Mar 2018, 16:50 • openhardware.io 7 Dec 2018, 09:04 -
Adding sensors and relays to serial gateway
Development • 8 Dec 2015, 16:09 • Tino 9 Dec 2015, 16:19
