Posts made by Didi

It´s from his blog and i think the pcb is updated

@David-Vitrant said:

Hmm hey sorry for dumb question especially since it's a super old post but I don't seem to find a link to the eagle/cad documents or a way to buy this shield. I have Nextion 2.4, 3.2" and some enhanced version too.

Let me know if I missed the buy button or a way to get the fritzing/eaglecad I can change myself and maybe adapt to my sousvide and thermostat project :).

Help Please,
DV

Here is the nextion pcb

Good work

Peter Scargill made a Esp8266 PCB for Nextion here

Here is a package you can start without installing anything

I don´t have noticed that.
Here is the github link

Read this for a Nodered userinterface
http://tech.scargill.net/node-red-ui/
http://tech.scargill.net/more-node-red-ui/

Cool can´t wait for this,have bought 6 Molgans last week

@Dwalt said:

I use some of the ESP-12, the Huzzah from adafruit and i have several commercial products with imbedded ESP8266 which i reflashed and MySensorized. I will try this weekend to document a project in detail. Too busy today.

Have you done the documentation?

Write a PM to me @ Transifex please

@Takero said:

@Didi please don't use "Stolperte" for Tripped

please make it better and join our team at https://www.transifex.com/mycontrollerorg/multi-locale/

German translation at 100 %

Attention the Amazon link is for 10 pieces
!!!!

Gucksdu here

@tbowmo said:

Hmm. .think I need to install this on all the mobiles in the household..

It could bring an end to "Dad, I can't remember where my phone is, could you please call it?" only to find out that it's on silent mode..

same here with my girls

I love this new feature. No more wasting time for seeking parts and put them together.

@gigi said:

@Dombo71 look a fritzing schematic

Can you share the fritzing file please

Congratulation to all winners.

@mfalkvidd said:

Very cool, I love the big red button. Where did you find it?

http://www.ebay.de/itm/Not-Aus-Schalter-mit-Pilzkopf-Rot-rastend-/191784915914

Nice work

@ferpando said:

I'll keep you posted

What´s up did you clean your project?

@jkandasa said:

I am happily announce that MyController.org released it major milestone of 0.0.3-alpha1 release.

Nice work

Take a look here, maybe it help you a little bit

@hek said:

@Didi
You can taken any example sketch from the dev-branch and run it on the ESP8266.

Thank you hek i will try it

That´s a very good idea

@martinus said:

Nice to be able to use MySensors without an Arduino Pro mini and without a NRF24L01 module. Just one single ESP. Opens up new possibilities...

Cann you share your setup please?

@mfalkvidd

You want to make your town mysensors

@TD22057
I understand that,what was confusing me was the Eclipse/Arduino IDE thing

@hek
Can you give some more info

@GertSanders said:

@Didi Here is the BOM and EAGLE files.

Thank you

@GertSanders
Please post the BOM.

Thank you

I have Rasbian Jessy newest version.

@jkandasa said:

You have to add some script on startup to trigger mycontroller/bin/start.sh

I´m not so familiar with linux,maybe you can help me out?

@scalz any news ?

I have had a power blackout this morning and mycontroller.org server doesn´t restart. Is it possible that the server automaticly restart after a reboot?

Hallo,
I want to know which members are speaking german here in the forum, because sometimes it´s hard to understand the technical stuff here in english for me.
Maybe someone can help me discuss things in my native language.

If you are german speaking give me a

Thank you

@jkandasa said:

What are all the languages should we support? Can you add more details on this in github?

answered on github

@jkandasa
Hi,
can you please add multilange support for MyController.org .
At the moment this can be made quick.After Mycontroller is growing more and more it become very difficult.

Regards Didi

@jkandasa

@rvendrame said:

So, myself, @Bertb , @Didi = 3 PSUs, better than 2. I will share with you both the ship-to address ok? Thanks a lot!

@Bertb said:

As you please ...

thank you

@hek said:

Master branch on github is now 1.5!

Great work

@Bertb said:

voeding.doc

can you make a pdf, i have no microsoft office

@rvendrame said:

Let me know and I will share the address via PM (Denmark).

I will send him a powersupply too.

@ferpando said:

@Didi
YesI will when I have the second version ready.
This is a bit messy
I'll keep you posted

Any news?

i guess fluke can set to eng,thanks @Bertb for the results,think you don´t make it at home

@Bertb said:

Last week I carried out an elektrical safety test on the HLK-PM01 to NEN 60101 (Dutch test for medical equipment) and it performed pretty well.

I can´t wait to see the results

@Moshe-Livne said:

@Didi Any initial results? curiosity is killing me....

Sorry Moshe no tests,i was in holidays with my kids

Powersupplies arrived

my 2c : wire everything to your meter cabinet and you can always do what you want

@ThinkPad said:

I would be careful when stripping cheap USB-powersupplies and tucking them into a box in the wall.

Thanks for the information.The most powersupplies are horrible.
The engineers have developed them must go to jail.
Safety must be the major goal not the price.

@Moshe-Livne said:

@ServiceXp @petewill @Didi here is another one!

And pice is ok

Found one at ebay:
http://www.ebay.de/itm/5V-550mA-switching-power-supply-module-MYRRA-47122-PCB-mount-/301663807573?pt=LH_DefaultDomain_3&hash=item463c906855

@petewill said:

@Moshe-Livne @ServiceXp Cool, thanks! By testing, what sort of testing could I do to know it's safe?

I have ordered 5 of them and i will test them at full 600 ma for 4 weeks in a flush box and protocoll data.I think if they don´t smoke we can use them on pcb

you gave me more solutions i think about before you here

you make yourself always down

@n3ro said:

@Didi fixed

@n3ro said:

@Didi und wie heißt das verdammte teil auf englisch?

Reed switch

@n3ro said:

2x Reedschalter (http://www.reichelt.de/KSK-1A663-2025/3/index.html?&ACTION=3&LA=446&ARTICLE=151700&artnr=KSK+1A663+2025&SEARCH=magnet+schlie�er)

Hast du gut gemacht mit dem Reedschalter.

I mean nice denglish

@Moshe-Livne said:

@petewill @ServiceXp here is the datasheet http://www.hlktech.net/product_detail.php?ProId=54

I will give them a try and order some for testing in a flush box.

@Moshe-Livne said:

@Didi it is cheaper to buy better fire and life insurance

That´s a good point

@Moshe-Livne said:

@Didi ouch!

Yes,but they have over temperature protection

@Moshe-Livne

About 20-25 euro

@sundberg84 said:

As long as they dont catch fire and deliver 5v im happy!

That´s the problem i see with the cheap ones

@petewill said:

Does anyone know of any 120V AC to 5V DC transformers that are safe to put in a wall electrical box?

here you go
http://www.recom-international.com/pdf/Powerline-AC-DC/RAC03-SCR_277.pdf

http://www.tracopower.com/products/tiw.pdf

I knowMr Scargills techblog very long and it´s really good

If it´s this
https://www.kickstarter.com/projects/1598272670/chip-the-worlds-first-9-computer
than read this
https://olimex.wordpress.com/2015/06/05/how-to-get-in-the-news-tell-people-that-you-will-make-and-sell-something-which-cost-you-20-for-9/

I´ve used the same driver on win7 and it works too.

Here is a nice button libary
http://www.mathertel.de/Arduino/OneButtonLibrary.aspx

I want to buy one

@hek said:

Hope to build enough confident to give it another try. But I suspect we got one of these eco-washers...

I bought one this year and my wife is really happy with it

@Florian Strempel

I live in germany too.If you look a little bit closer at amazon.de they are a few cents more expensive.I order 90 % of my parts there and you have to wait 10-15 days.

@tekka

Wow 48 channels thats awesome

@maglo18 said:

I use 3 x transformers One for each phase

Sorry for me it sounds like you use 1 transformer that was confusing me

@Dheeraj said:

attempt over last week , circuit board with 2x relay actuator and hall current sensor ( acs712 ) and step down transformer. The most challenging part is how to pack your creation in a nice box.

Nice work.Can you show how you wired this and maybe share your sketch ?

i was on the website yesterday,but now the link is broken

@maglo18

please explain how to use one transformer on 3 phases to measure voltage on each

What do you think about this nice controller i found at kickstarter.

https://www.kickstarter.com/projects/802159142/nuimo-seamless-smart-home-interface

Sorry,i misunderstood you

@Moshe Livne

Have you checked your port settings?

@ferpando
Thank you

Is there a chance that you can share your full setup? I like your wall touch switch very much.

Yes it does.
Look data sheet http://www.mouser.com/ds/2/468/RAC01_02-SC-16262.pdf