Troubleshooting

@mfalkvidd yes, I'm using node 2 and mysensor 1 gateway. Unfortunately I don't get on work 2.0 gateway..... :( :( :( Next week I will restart with a fresh Raspbian, maybe I will solve my initial issues... Thank you very much!

it seems strange but I solved with recompiling MySensors Gateway with the following configuration options ./configure --my-rf24-cs-pin=24 --my-rf24-ce-pin=15 --my-gateway=ethernet by magic, everything begins to work (for the first time).

@JWB That setting is turning the gateway into a "client" which needs to connect to a server (which is your controller). Without this set it is running as a "server" which accepts incoming connections from other devices on the network (like your controller)

@core_c correction, after I typed and posted this, the serial log started again and it did send the message, this is weird 14026 MCO:SLP:MS=0,SMS=0,I1=1,M1=1,I2=255,M2=255 14032 MCO:SLP:TPD 14034 MCO:SLP:WUP=1 14047 TSF:MSG:SEND,11-11-0-0,s=7,c=1,t=38,pt=7,l=5,sg=0,ft=0,st=OK:0.85 14055 MCO:SLP:MS=3000,SMS=0,I1=1,M1=1,I2=255,M2=255 14059 MCO:SLP:TPD 14061 MCO:SLP:WUP=-1 14065 MCO:SLP:MS=2990,SMS=0,I1=1,M1=1,I2=255,M2=255 14071 MCO:SLP:TPD 14073 MCO:SLP:WUP=-1 14075 MCO:SLP:MS=2980,SMS=0,I1=1,M1=1,I2=255,M2=255 14082 MCO:SLP:TPD 14084 MCO:SLP:WUP=-1 14086 MCO:SLP:MS=2969,SMS=0,I1=1,M1=1,I2=255,M2=255 14092 MCO:SLP:TPD 14094 MCO:SLP:WUP=-1 14098 MCO:SLP:MS=2957,SMS=0,I1=1,M1=1,I2=255,M2=255 14102 MCO:SLP:TPD 14104 MCO:SLP:WUP=-1 14108 MCO:SLP:MS=2947,SMS=0,I1=1,M1=1,I2=255,M2=255 14114 MCO:SLP:TPD 14116 MCO:SLP:WUP=-1 14118 MCO:SLP:MS=2937,SMS=0,I1=1,M1=1,I2=255,M2=255 14125 MCO:SLP:TPD 14127 MCO:SLP:WUP=-1 14129 MCO:SLP:MS=2926,SMS=0,I1=1,M1=1,I2=255,M2=255 14135 MCO:SLP:TPD 14137 MCO:SLP:WUP=-1 14141 MCO:SLP:MS=2914,SMS=0,I1=1,M1=1,I2=255,M2=255 14145 MCO:SLP:TPD 14147 MCO:SLP:WUP=-1 14151 MCO:SLP:MS=2904,SMS=0,I1=1,M1=1,I2=255,M2=255 14157 MCO:SLP:TPD 14159 MCO:SLP:WUP=-1 14161 MCO:SLP:MS=2894,SMS=0,I1=1,M1=1,I2=255,M2=255 14168 MCO:SLP:TPD

Again, that was it! @tbowmo Thank you again so much! Everything is running smoothly :-)

@gohan yes . i change raspberrypi gateway to latest 2.2.0 beta

@sundberg84 haha:grin: ,I did not found myself a robot,But thank you for your links.

If you want to check only communication you can use myscontroller, but using a proper controller will give you a more complete test.

@tekka said in Sensebender GW: TSP FAIL: @nick-van-alst You need to install the MySensors Board definitions, please follow the instructions here | section "Other configurations" you are a life safer! i didn't realize i didn't have that one yet!

ok, thanks for clarifying this!

@Yveaux Ok went to 2.0 and that indeed works

@rusg323 said in [Solved] Building RPi Gateway - No Support for nRF24 radio on this platform: nfiguration chang actually this is the only way, every configure launch will overwrite previous settings. Thats how configure wokrs. You can do ./configure --help to see all the options

@melwinek signing is memory optimized on the development branch. It cost some yes, but that is pretty much just how it is. It takes some ram to store digests and intermediate data for the calculations.

@bgunnarb correct, the counter is frozen during sleep.

Thanks for the note, @Nca78 . It seems like my systems defaults to an ID of 255, though. I swapped out another Pro Mini and another radio (debugged the Arduino side using the RF24 library), and now I'm seeing more traffic between the Arduino and the RPi, though it seems to fall over at receiving an ID. Note that I ran the ClearEpromConfig example immediately before pushing the MotionSensor example (no changes, did not define MY_NODE_ID). Arduino: 0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1 4 TSM:INIT 4 TSF:WUR:MS=0 12 TSM:INIT:TSP OK 14 TSM:FPAR 16 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 2025 !TSM:FPAR:NO REPLY 2027 TSM:FPAR 2029 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 2037 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 2043 TSF:MSG:FPAR OK,ID=0,D=1 4038 TSM:FPAR:OK 4038 TSM:ID 4040 TSM:ID:REQ 4044 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 6051 TSM:ID 6051 TSM:ID:REQ 6055 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 8065 TSM:ID 8065 TSM:ID:REQ 8069 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 10076 TSM:ID 10076 TSM:ID:REQ 10080 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 12089 !TSM:ID:FAIL 12091 TSM:FAIL:CNT=1 12093 TSM:FAIL:PDT 22097 TSM:FAIL:RE-INIT 22099 TSM:INIT 22106 TSM:INIT:TSP OK 22110 TSM:FPAR 22112 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 24121 !TSM:FPAR:NO REPLY 24123 TSM:FPAR 24125 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 26134 !TSM:FPAR:NO REPLY 26136 TSM:FPAR 26138 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 28147 !TSM:FPAR:NO REPLY 28149 TSM:FPAR 28151 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 30162 !TSM:FPAR:FAIL 30164 TSM:FAIL:CNT=2 30167 TSM:FAIL:PDT 40171 TSM:FAIL:RE-INIT 40173 TSM:INIT 40179 TSM:INIT:TSP OK 40183 TSM:FPAR 40185 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 42196 !TSM:FPAR:NO REPLY 42199 TSM:FPAR 42201 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 42209 TSF:MSG:READ,0-0-255,s=255,c=3,t=8,pt=1,l=1,sg=0:0 42215 TSF:MSG:FPAR OK,ID=0,D=1 44210 TSM:FPAR:OK 44212 TSM:ID 44212 TSM:ID:REQ 44216 TSF:MSG:SEND,255-255-0-0,s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=OK: RPi: pi@rpi:~/projects/RF24/rf24libs/RF24/examples_linux $ sudo mysgw -d mysgw: Starting gateway... mysgw: Protocol version - 2.1.1 mysgw: MCO:BGN:INIT GW,CP=RNNG---,VER=2.1.1 mysgw: TSF:LRT:OK mysgw: TSM:INIT mysgw: TSF:WUR:MS=0 mysgw: TSM:INIT:TSP OK mysgw: TSM:INIT:GW MODE mysgw: TSM:READY:ID=0,PAR=0,DIS=0 mysgw: MCO:REG:NOT NEEDED mysgw: Listening for connections on 0.0.0.0:5003 mysgw: MCO:BGN:STP mysgw: MCO:BGN:INIT OK,TSP=1 mysgw: New connection from 192.168.11.31 mysgw: Client 0 connected mysgw: Client 0: 0;0;3;0;2; mysgw: Client 0: 0;0;3;0;18;PING mysgw: Client 0: 0;0;3;0;2;Get Version mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: mysgw: TSF:MSG:BC mysgw: TSF:MSG:FPAR REQ,ID=255 mysgw: TSF:PNG:SEND,TO=0 mysgw: TSF:CKU:OK mysgw: TSF:MSG:GWL OK mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: mysgw: TSF:MSG:BC mysgw: TSF:MSG:FPAR REQ,ID=255 mysgw: TSF:CKU:OK,FCTRL mysgw: TSF:MSG:GWL OK mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: mysgw: Client 0: 255;255;3;0;4;1 mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=4,pt=0,l=1,sg=0,ft=0,st=OK:1 mysgw: Client 0: 0;0;3;0;18;PING mysgw: TSF:MSG:READ,255-255-0,s=255,c=3,t=3,pt=0,l=0,sg=0: mysgw: Client 0: 255;255;3;0;4;1 mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=4,pt=0,l=1,sg=0,ft=0,st=OK:1 mysgw: Client 0: 0;0;3;0;18;PING mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: mysgw: TSF:MSG:BC mysgw: TSF:MSG:FPAR REQ,ID=255 mysgw: TSF:PNG:SEND,TO=0 mysgw: TSF:CKU:OK mysgw: TSF:MSG:GWL OK mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: mysgw: TSF:MSG:BC mysgw: TSF:MSG:FPAR REQ,ID=255 mysgw: TSF:CKU:OK,FCTRL mysgw: TSF:MSG:GWL OK mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: mysgw: TSF:MSG:BC mysgw: TSF:MSG:FPAR REQ,ID=255 mysgw: TSF:CKU:OK,FCTRL mysgw: TSF:MSG:GWL OK mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: mysgw: TSF:MSG:BC mysgw: TSF:MSG:FPAR REQ,ID=255 mysgw: TSF:CKU:OK,FCTRL mysgw: TSF:MSG:GWL OK mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 mysgw: Client 0: 0;0;3;0;18;PING mysgw: Client 0: 0;0;3;0;18;PING mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: mysgw: TSF:MSG:BC mysgw: TSF:MSG:FPAR REQ,ID=255 mysgw: TSF:PNG:SEND,TO=0 mysgw: TSF:CKU:OK mysgw: TSF:MSG:GWL OK mysgw: TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 mysgw: TSF:MSG:READ,255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0: mysgw: TSF:MSG:BC mysgw: TSF:MSG:FPAR REQ,ID=255 mysgw: TSF:CKU:OK,FCTRL mysgw: TSF:MSG:GWL OK Am I missing a step? I am running "sudo mysgw -d" on the RPI, followed by "sudo service domocoticz.sh restart", then pushing the MotionSensor example to my Pro Mini. Thanks again for everyone's help!

Does anyone sees why my gateway doesn't function properly? It keeps failing to transmit the seed: 0;255;3;0;9;TSF:MSG:READ,7-7-255,s=255,c=3,t=7,pt=0,l=0,sg=0: 0;255;3;0;9;TSF:MSG:BC 0;255;3;0;9;TSF:MSG:FPAR REQ,ID=7 0;255;3;0;9;TSF:PNG:SEND,TO=0 0;255;3;0;9;TSF:CKU:OK 0;255;3;0;9;TSF:MSG:GWL OK 0;255;3;0;9;Skipping security for command 3 type 8 0;255;3;0;9;TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=OK:0 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=24,pt=1,l=1,sg=0:1 0;255;3;0;9;Skipping security for command 3 type 24 0;255;3;0;9;TSF:MSG:PINGED,ID=7,HP=1 0;255;3;0;9;Skipping security for command 3 type 25 0;255;3;0;9;TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=OK:1 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=15,pt=6,l=2,sg=0:0101 0;255;3;0;9;Skipping security for command 3 type 15 0;255;3;0;9;Mark node 7 as one that require signed messages 0;255;3;0;9;Mark node 7 as one that do not require whitelisting 0;255;3;0;9;Informing node 7 that we require signatures 0;255;3;0;9;Informing node 7 that we do not require whitelisting 0;255;3;0;9;Skipping security for command 3 type 15 0;255;3;0;9;TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0101 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: DDE48447F85461704772199A57475584FDB67E10E89A40151000000000000000 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:DDE48447F85461704772199A57475584FDB67E10E89A401510 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;Client 0: 0;0;3;0;18;PING 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: EABBA58AB60786BAE905D7A4F62D02CAF144C0234A88446D82AAAAAAAAAAAAAA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:EABBA58AB60786BAE905D7A4F62D02CAF144C0234A88446D82 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: 778653D94C9D64F9F85EB510EC9E26B6C708C214099BEF13A7AAAAAAAAAAAAAA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:778653D94C9D64F9F85EB510EC9E26B6C708C214099BEF13A7 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;Client 0: 0;0;3;0;18;PING 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: BB8C5D2E6B5F76AAF8F8C5FA8FACB5D476C01E066B41CBF410AAAAAAAAAAAAAA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:BB8C5D2E6B5F76AAF8F8C5FA8FACB5D476C01E066B41CBF410 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=1,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: BDEC409E8ACE05F8C8800ABED429388DD768D02C5C7A66BB4EAAAAAAAAAAAAAA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:BDEC409E8ACE05F8C8800ABED429388DD768D02C5C7A66BB4E 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;Client 0: 0;0;3;0;18;PING 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=26,pt=1,l=1,sg=0:2 0;255;3;0;9;Skipping security for command 3 type 26 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=16,pt=0,l=0,sg=0,ft=0,st=OK: 0;255;3;0;9;Nonce requested from 7. Waiting... 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=17,pt=6,l=25,sg=0:D9F847698C6AC2DAC797F13667B764C90209D0987DD21A6ACA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;Nonce received from 7. 0;255;3;0;9;Proceeding with signing... 0;255;3;0;9;Message to process: 00070E231BFF01 0;255;3;0;9;Current nonce: D9F847698C6AC2DAC797F13667B764C90209D0987DD21A6ACAAAAAAAAAAAAAAA 0;255;3;0;9;HMAC: 4DF46234B56C540677AEF39E1D7D68D959E5D955CD18CA5DBAC09C985A6049C8 0;255;3;0;9;Signature in message: 01F46234B56C540677AEF39E1D7D68D959E5D955CD18CA5D 0;255;3;0;9;Message signed 0;255;3;0;9;Message to send has been signed 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=27,pt=1,l=1,sg=1,ft=0,st=NACK:1 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=26,pt=1,l=1,sg=0:2 0;255;3;0;9;Skipping security for command 3 type 26 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=16,pt=0,l=0,sg=1,ft=0,st=NACK: 0;255;3;0;9;Failed to transmit nonce request! 0;255;3;0;9;!TSF:MSG:SIGN FAIL 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=26,pt=1,l=1,sg=0:2 0;255;3;0;9;Skipping security for command 3 type 26 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=16,pt=0,l=0,sg=1,ft=0,st=NACK: 0;255;3;0;9;Failed to transmit nonce request! 0;255;3;0;9;!TSF:MSG:SIGN FAIL 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=26,pt=1,l=1,sg=0:2 0;255;3;0;9;Skipping security for command 3 type 26 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=16,pt=0,l=0,sg=1,ft=0,st=NACK: 0;255;3;0;9;Failed to transmit nonce request! 0;255;3;0;9;!TSF:MSG:SIGN FAIL 0;255;3;0;9;Client 0: 0;0;3;0;18;PING 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=1,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: 3781530A27CEB098525F98B1D335AA07A5A9E17EEB71770681AAAAAAAAAAAAAA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:3781530A27CEB098525F98B1D335AA07A5A9E17EEB71770681 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: 89CAAF6D9B47E4C84E55DC405D7E7E57E9E2A8C3B483B1FE62AAAAAAAAAAAAAA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:89CAAF6D9B47E4C84E55DC405D7E7E57E9E2A8C3B483B1FE62 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;Client 0: 0;0;3;0;18;PING 0;255;3;0;9;Client 0: 0;0;3;0;18;PING 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=1,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: 4851FEF7C8A1FA983D55A4D4D0E8C37E60BBE59CA382A4D282AAAAAAAAAAAAAA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:4851FEF7C8A1FA983D55A4D4D0E8C37E60BBE59CA382A4D282 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;Client 0: 0;0;3;0;18;PING 0;255;3;0;9;TSF:MSG:READ,7-7-0,s=255,c=3,t=16,pt=0,l=0,sg=0: 0;255;3;0;9;Skipping security for command 3 type 16 0;255;3;0;9;SHA256: CE5CF85311A7C044A51B534C672804C80C2BED02670BF52ABAAAAAAAAAAAAAAA 0;255;3;0;9;Skipping security for command 3 type 17 0;255;3;0;9;!TSF:MSG:SEND,0-0-7-7,s=255,c=3,t=17,pt=6,l=25,sg=0,ft=0,st=NACK:CE5CF85311A7C044A51B534C672804C80C2BED02670BF52ABA 0;255;3;0;9;Failed to transmit nonce! 0;255;3;0;9;Client 0: 0;0;3;0;18;PING I'm sure that that antenna connections are well, just made a new board, and it has a good 47uF cap on it.

@scalz thanks, well, nothing is irrelevant, when not working there must be at least one of your points above which I'm not considering enough :) Now it is still working well, checking in every minute without a single duplicated message in the controller even if far away from the gw and the remote relay triggering when requested. I should probably do a better job in replicating the issue to at least limit the possible causes...I'll report back in the future with better data I hope :) Thanks!

@Anticimex on a few nodes I cannot enable signing as even with debug disable, it still does not fit within 32kb memory. I have dualoptiboot, which means memory is 1.5kb less that using optiboot. Optiboot is not good for OTA. This is the situation either ... or This is why I'm increasing often looking at Moteino Mega or ARM M0. The other thing is that I can avoid using libraries and re-write the code impreling functions which I only use in the code. This is a very tedious process and the code has to be changed from node to node as some parts of a library is missing. Life is just not perfect :-(