💬 Sensebender Micro

[Dan S.]

I had that same problem, but then I carefully checked my address entry on the site and found I had made an error. Once corrected it processed OK.

[Ironbar]

@Dan-S.

Crazy but there was a space after my city name that was preventing it from working. I would have never thought it was that picky. Ordered 5 and I cannot wait to see how well they work!

[toabhishekverma]

cool .. Any idea how long it last on battery?

[mfalkvidd]

The history thread mentioned in forum.mysensors.org/topic/1345/sensebender-micro/1 has a lot of information. I think the conclusion was 1-2 years.

[GertSanders]

A version with the SMD NRF24L01+ would be cool !

[RJ_Make]

Is it possible to add an ds18b20 to the Sensebender?

[GertSanders]

@RJ_Make
That certainly is possble, but there is already an excellent SI7021 on board (temperature AND humidity), so why would you need it?
In any case you can connect it via de exposed pins.

[RJ_Make]

@GertSanders Thanks, It would be used for remote temp. sensing in a Ref/freezer/aquarium.. etc.

[GertSanders]

@RJ_Make
Certainly possible, check the examples.

[Saimen]

Hello,
is it possible, that the Sketch posted here, does not work with the MySensors libraray V2.0? There have been removed many libs, (SI7021, sha204, RunningAverage), which are used in the Sketch "SensebenderMicro.ino" V01.4.
I had a little bit trouble last weekend, to get it run.
I switched back to Mysensors lib 1.56 and used the expamle Sketch "SensebenderMicro" which was included in this lib. Then it worked.
But thanks for this Great Projekt, and this great Board Sensenbender Micro

Saimen

[tbowmo]

@Saimen

External libraries (and examples depending on them) have been moved to a separate repository https://github.com/mysensors/MySensorsArduinoExamples.

This was done because we can not have the external libraries in the main repository now that we are in the arduino library manager.

[Saimen]

@tbowmo Thank you very much for your response and explaining.

[fearoffish]

Anyone managed to get this working with PlatformIO (through Atom) yet? I'm struggling.

[phildefer]

@tbowmo

I upgrade my sensebender firmware with the new one (V1.4), and i have a question.

In the sketch (https://www.mysensors.org/hardware/micro) the line

//#include <avr/power.h>

is commented.

Is it "normal" or is it a mistake ?

[tbowmo]

@phildefer

I think it's a leftover from a cleanup at some point in time. Not used anymore.. The MySensors core library is handling the sleep mechanism now.

[denisvdb]

To reprogram the sketch in a sensbender micro, wich board must be selected in the arduino prg?
I have problem with inclusion in jeedom, the command are not loaded.
thx

[marceltrapman]

@fearoffish did you manage to get this working?
And, if so, what was the issue?

I am looking into changing to PlatformIO on Atom or even CLion...

[loic13]

Hi, I'm getting this error message when compiling the sketch with the 2.1.1 MySensors library:
SensebenderMicro:168: error: 'getConfig' was not declared in this scope
isMetric = getConfig().isMetric;

I just commented out the line as workaround, but not sure that its correct.

[hek]

Hmm.. The api was recently changed to getControllerConfig().isMetric;

I'll update the example.

[loic13]

Thank you.