Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you may not be able to execute some actions.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

💬 Soil-moisture-meter

openhardware.io last edited by openhardware.io

https://www.openhardware.io/view/672/Soil-moisture-meter
Reply Quote 0
1 Reply Last reply
naty6458 last edited by

Thank you !!
You have the pcb design file ?
Reply Quote 0
1 Reply Last reply
Serg2055 last edited by

Hello. sorry, I can't share the Board source code with you. I can either sell you the project or sell the finished device.
Reply Quote 0
1 Reply Last reply
naty6458 last edited by naty6458

I want the product Send me email
( naty6458@gmail.com )
Reply Quote 0
1 Reply Last reply
Nca78 Hardware Contributor last edited by

Might be a stupid question, but how does this (and it seems, your other projects on openhardware website) qualify as "open hardware" ?
The only thing looking like "source" is a jpg picture of the schematic that's so small and compressed it's not even readable.
Reply Quote 1
1 Reply Last reply
Nca78 Hardware Contributor last edited by

@Serg2055 as the name says, openhardware.io is for open hardware.
You are allowed to sell PCB units, partially or fully soldered boards, but selling source is not an acceptable option. Please include readable schematic and source of your boards or at least gerbers or bom. For all your boards posted on openhardware.io.
Thank you !
Reply Quote 1
1 Reply Last reply

6
Posts

1166
Views

Suggested Topics

💬 Arduino Pro Mini Shield for RFM69(H)W
OpenHardware.io • arduino rfm69 temperature sensor humidity pcb atmega328 atmega328p si7021 rfm69hw wireless bme280 pressure interstitial • • openhardware.io

53

1
Votes

53
Posts

11590
Views

@gohan said in Arduino Pro Mini Shield for RFM69(H)W: If I remeber right that pin is used as input so the RFM69 is not receiving any 5v signal. In addition there are people claming they have the RFM69 module working on 5v on data pins and 3.3v on vcc, but I hardly suggest to do it. thank you just what i thought . about direct 5v on data...well... i seen a big red sign saying n :DONT do it! lol Level converters are so cheap...that i ordered 5 or 10 thoguether with rfm69 board. sorry about hijack this topic, i though i was on general discussion
💬 Soil Moisture Sensor Pro Mini
OpenHardware.io • nrf24l01 mysensor pro mini soil moisture • • openhardware.io

23

0
Votes

23
Posts

6469
Views

@schif Hello, Thanx for you comment. Yes you can use it but use a ceramic capacitor
Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

33

0
Votes

33
Posts

13722
Views

@BulldogLowell said: @mntlvr said: And if all six switches are set to gnd the total current would only be 1.5 ma (5volts /20k)x6=.0015 amps I believe. the internal pullup resistors are 20k-50k according to arduino spec. yeah, I know, but if you are underpowered already (the radio....) the extra draw may create an issue... who the heck knows. I'll try on one of mine when I get the chance... your code works, and that's a treat, but now I need to understand why the simpler execution of the same code doesn't seem to cooperate with your rig. weird... you code with pinMode(buttonPin[i], INPUT); exactly same board and USB power supply and same transceiver, here are the results Sending device info...sensor started, id 32 send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1 send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0 read: 0-0-32 s=255,c=3,t=6,pt=0,l=1:I send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.15 Setting up Pin0 send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin1 send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin2 send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=ok: Setting up Pin3 send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: read: 32-32-0 s=3,c=0,t=0,pt=0,l=0: Setting up Pin4 send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: read: 32-32-0 s=4,c=0,t=0,pt=0,l=0: Setting up Pin5 send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok: read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch read: 36-81-0 s=0,c=5,t=0,pt=0,l=0: version mismatch Sensor presentation complete send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1 Pin 3 changed state... New State: Tripped send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1 Pin 0 changed state... New State: Tripped send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1 Pin 1 changed state... New State: Tripped send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1 Pin 2 changed state... New State: Tripped send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:0 Pin 3 changed state... New State: Not Tripped
How long a cable can one have between the uC and a sensor?
Hardware • sensor cabling • • Zeph

4

0
Votes

4
Posts

2982
Views

I'm thinking of 4 PIR sensors (at each end of the two aisles). And I was thinking of a reed switch at the top of the garage door opening, and one at the door into the house. And the most convenient location for the relays controlling the lights is still a 7th location. I could put 7 wireless nodes into the garage, but then I have to run power to all of them - if 5v we still have the same long wire issues, if 120VAC then I need 7 power supplies. And the local control now involves passing messages between nodes rather than just sensing input pins and controlling output pins on the same uC. The cables supply power to the RF enabled nodes will have the same length (whether DC or AC power) as the cables going to a simple sensor, and follow the same routes. So it would be possible to do that, but at considerable cost in money and time and complexity - compared to just running a three or 4 wire cable from the main node to a $2 PIR located 1o-20 feet away, if that can easily be made to work (perhaps with the addition of a couple of small, cheap passive components. I don't know if I do need to worry about inductance, capacitance, reflections etc - that's why I'm asking. These things aren't usually specified one way or the other - you kind of need some practical experience. If those are indeed killers that cannot be fixed with a couple of passives, then I may go to the "make every sensor a full node with AC power supply and distribute AC to them instead" route. But wouldn't it be nice if I can do a $2 easy fix instead? One data point - in the Do It Yourself Christamas lighting control community, they routinely get away with sending TTL or CMOS signals quite a ways from a control unit to an optoisolator input (which controls a Triac to form a SSR which does PWM dimming of an AC circuit). The signals are just a 120 Hz PWM signal but the edge timing is at 120Hz * 256 PWM divisions. You won't find much about driving a 50' cable from a TTL or CMOS output in the datasheets, but it works in this application! It would not work if you were sending a 1 Mbps signal tho. So I have some hope that a PIR 20 feet down a cable may be able to pass back a quite usable logic signal, since it changes rather rarely. But I was hoping for some advice about the gotchas. Remember the sensors I've mentioned are magnetic reed switches, LDRs, and PIR sensors - only the latter needs power per se separate from the signal.
💬 MDMSMotion
OpenHardware.io • mysensors sensor motion majordomo • • openhardware.io

1

1
Votes

1
Posts

390
Views

No one has replied
Moving sensor from one network to another may cause conflict
Feature Requests • sensor security network • • iliak

1

0
Votes

1
Posts

1286
Views

No one has replied

💬 Soil-moisture-meter

Suggested Topics

💬 Arduino Pro Mini Shield for RFM69(H)W
OpenHardware.io • arduino rfm69 temperature sensor humidity pcb atmega328 atmega328p si7021 rfm69hw wireless bme280 pressure interstitial • • openhardware.io

💬 Soil Moisture Sensor Pro Mini
OpenHardware.io • nrf24l01 mysensor pro mini soil moisture • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

How long a cable can one have between the uC and a sensor?
Hardware • sensor cabling • • Zeph

💬 MDMSMotion
OpenHardware.io • mysensors sensor motion majordomo • • openhardware.io

Moving sensor from one network to another may cause conflict
Feature Requests • sensor security network • • iliak

20
Online

11.7k
Users

11.2k
Topics

113.0k
Posts

💬 Soil-moisture-meter

Suggested Topics

💬 Arduino Pro Mini Shield for RFM69(H)W OpenHardware.io • arduino rfm69 temperature sensor humidity pcb atmega328 atmega328p si7021 rfm69hw wireless bme280 pressure interstitial • • openhardware.io

💬 Soil Moisture Sensor Pro Mini OpenHardware.io • nrf24l01 mysensor pro mini soil moisture • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge My Project • sensor • • mntlvr

How long a cable can one have between the uC and a sensor? Hardware • sensor cabling • • Zeph

💬 MDMSMotion OpenHardware.io • mysensors sensor motion majordomo • • openhardware.io

Moving sensor from one network to another may cause conflict Feature Requests • sensor security network • • iliak

20Online

11.7kUsers

11.2kTopics

113.0kPosts

💬 Arduino Pro Mini Shield for RFM69(H)W
OpenHardware.io • arduino rfm69 temperature sensor humidity pcb atmega328 atmega328p si7021 rfm69hw wireless bme280 pressure interstitial • • openhardware.io

💬 Soil Moisture Sensor Pro Mini
OpenHardware.io • nrf24l01 mysensor pro mini soil moisture • • openhardware.io

Binary Control Modules , Switches, or Outlets on a Vera Edge
My Project • sensor • • mntlvr

How long a cable can one have between the uC and a sensor?
Hardware • sensor cabling • • Zeph

💬 MDMSMotion
OpenHardware.io • mysensors sensor motion majordomo • • openhardware.io

Moving sensor from one network to another may cause conflict
Feature Requests • sensor security network • • iliak

20
Online

11.7k
Users

11.2k
Topics

113.0k
Posts