I've been able to get MySensors working with HomeGenie using the MQTT gateway. It doesn't have two-way communication or software-based pairing yet, but I'll work on those in the future.
Might be helpful for somebody... Things configuration for OpenHab2:
Bridge mysensors:bridge-eth:gateway_2 [ ipAddress="192.168.178.50", tcpPort=5003, sendDelay=200, enableNetworkSanCheck=true ] {
/** define things connected to that bridge here */
light sonoff01 [ nodeId="0", childId="0", requestAck=true ]
}
sensor id is not the same as node id.
sensor id = 255 is used for internal stuff like id request and battery level for node. You can assign 0-254 to your own attached sensors (to the arduino node).
Hey there @Chaotic ! This is Fay from codebender.cc Thank you for using codebender! I just wanted to let you know that one of the sketches you are using in this comment has been deleted and so it is not available for users to view it. Let me know if you have any question.
Now the RPi based on a new install of Raspbian Jessie, OpenHab 1.8.0 and Mosquitto is up and running and the ESP8266 MQTT client does connect without any problems. I have not changed anything in the code but Mosquitto is now based on the RPi repository for Jessie and not the mosquito_wheezy one. That seems to have fixed it so those versions are likely different but I have not put any time into checking this.