💬 simple MySensors MultiSensor Board

[openhardware.io]

https://www.openhardware.io/view/562/simple-MySensors-MultiSensor-Board

[Robbie_]

Hi, i printed ur boards, its cool thank you :-). However i'm having some trouble getting the radio working properly.
It only works good when i touch the antenna..

Im not using the ceramic 0.1uf cap. and the 10k resistor..
is the 0.1uf cap. needed for the radio to work stable?

And yes, im using the 4.7 - 47uF Capacitor (Elko)

Thanks again, every cool board

[dirkc]

I always suggest to use caps wherever you power the board, because it "levels" or "balances" the current so it has more "stability". The resistor connected to reset is always needed as "pull-up", without that, the processor will either reboot or be unstable.

[terxw]

Hi, I placed an order with allpcb, but during review there was error no noc drill file, can samobody help me to generate them from brd file or is the file missing? Thanx for good board!

[dirkc]

@terxw all files from https://www.openhardware.io/view/562/simple-MySensors-MultiSensor-Board were sufficient, when I ordered my boards at allpcb. But you can create them with eagle on your own.

[momo90]

Hi!
I have the same problem as terxw. allpcb.com is missing the "NC drill date". Unfortunately I am not able to create this on my own. Can anybody upload this file?
Thanks