đŹ NModule Two buttons capacitive touch switch shield
-
-
The atmega328p datasheet seems to imply that there's some sort of inherent capacitive touch capability made possible via Atmel's QTouch library. It might (?) be that you can forgo the extra capacitive touch chips. Maybe somebody reading this knows? Just mentioning, as I haven't delved into it at all.
-
@NeverDie said in
NModule Two buttons capacitive touch switch shield:The atmega328p datasheet seems to imply that there's some sort of inherent capacitive touch capability made possible via Atmel's QTouch library. It might (?) be that you can forgo the extra capacitive touch chips. Maybe somebody reading this knows? Just mentioning, as I haven't delved into it at all.
Yes it can manage touch sensors but it needs to be actively monitoring them and there's no way it will match the 2-3ÂľA consumption of the TTP223.
-
I just soldered a version the easy way using the TTP223 ultra cheap breakout boards and I'm really happy with the result, finger is detected around 5mm away from the front plate so it's going to be perfect with a 3D printed box that I'm going to do right now
With NModule using CR2032 it takes a 551.9cm volume so should fit in a 545424mm box, a bit thinner if using SMD version of TTP223.
At the moment it's only made for SMD LEDs but as it's working so well with the breakout boards if there is some interest I can make a revision with a central bicolor (red/green) through hole led.
-
Do the ttp223 boards handle button debouncing (if there even is such a thing with "touch" buttons)?
-
@NeverDie said in
NModule Two buttons capacitive touch switch shield:Do the ttp223 boards handle button debouncing (if there even is such a thing with "touch" buttons)?
No need for debouncing with capacitive touch ICs, it's a mechanical problem.
-
Made a first print but setting for this filament are clearly wrong as the print quality sucks
Suggested Topics
-
Power Meter Pulse Sensor for multiple meters
My Project ⢠23 Sept 2020, 11:57 ⢠frydrik 23 Sept 2020, 11:57 -
đŹ mySensors Hit Train
OpenHardware.io ⢠7 Dec 2019, 14:52 ⢠openhardware.io 7 Dec 2019, 14:52 -
đŹ MySensors RS-485 Universal Module
OpenHardware.io ⢠18 Jun 2020, 05:45 ⢠openhardware.io 18 Jun 2020, 18:40 -
đŹ MyMasterSensor
OpenHardware.io ⢠7 May 2018, 15:39 ⢠openhardware.io 16 Jul 2019, 14:45 -
ATMega328p board w/ NRF24l01+ and Bluetooth module sockets
OpenHardware.io ⢠17 May 2016, 10:45 ⢠openhardware.io 17 May 2016, 10:45 -
đŹ Dollhouse
Announcements ⢠24 Sept 2017, 08:40 ⢠hek 25 Oct 2017, 07:50 -
ESP8266 as (MQTT) Gateway with I2C Sensors
Hardware ⢠24 Sept 2021, 13:32 ⢠Sunseeker 25 Sept 2021, 06:26 -
đŹ NRF51822 Livolo 2 channel 1 way EU switch(VL-C700X-1_Ver_C2)
OpenHardware.io ⢠11 Oct 2017, 13:40 ⢠openhardware.io 12 Oct 2017, 07:38
