When you read the data sheet correctly you can see, that the distance between the pins is different for a AA and AAA battery holder. That`s why I was asking if somebody can recommend a holder that fits.
Really interesting, maybe I could build something cool around the Arduino HeatpumpIR (https://github.com/ToniA/arduino-heatpumpir) library I've been building. Right now I'm integrating it with Domoticz (http://www.domoticz.com/forum/viewtopic.php?f=34&t=7179#p69647).
I'm an ex-Microsoft employee from Finland (resigned about a month ago).
Now the RPi based on a new install of Raspbian Jessie, OpenHab 1.8.0 and Mosquitto is up and running and the ESP8266 MQTT client does connect without any problems. I have not changed anything in the code but Mosquitto is now based on the RPi repository for Jessie and not the mosquito_wheezy one. That seems to have fixed it so those versions are likely different but I have not put any time into checking this.
@NeverDie Perhaps but the design is a bit too simple and unoriginal. I'd have to clean up the files a bit and I haven't touched Eagle since I made this board several years ago.
@Puneit-Thukral
Could you post your full working sketch please?
I'm revisiting some of my 51822 nodes that have sat collecting dust for a long time and thought i might try to get them working again.
