Hi, sorry for the delay, I had just read your post and I could said "me too"
But I solved the problem and it works for two years now.
I explain my solution here, if the French don't afraid you.
https://easydomoticz.com/forum/viewtopic.php?f=20&t=6497
I resume, a 7.5volts power supply, a passive injector, and a spécial home-made cable to bypass the RJ45 socket. The 7.5 v go to Vin-Gnd of the Nano to produce 5v wich is returned to the W5100. QED.
Rpx.
thx for reply
yes dragino HE works like yun I think.
for linkit as the product seems new, there is a little bit less docs. but I will see, price was so interesting that it was too much tempting lol.
I will tell you what I can get...
for fun, I have not presented yet, but I have a board in progress for raildin : 8x relays + 8inputs for yun and I added ethernet connector+hub usb chip
I would think that the "heavy lifting" of regulating the actual output power of the charger would be a function of the charge controller itself? Maybe you could tie into / control that somehow with your own microcontroller as brain / interface? Maybe they expose some API, serial, or other method of interfacing with their hardware?
What are/were you using for charge controller?
Also, what is "CT" in this context?
I have read a bit here and there about solar (and related moving around and controlling of power, eg. batteries, charge controllers, etc...), as it is something I plan on doing "eventually" although I have no direct experience as of yet. So I will be following this thread with interest.
