Ethernet Gateway Library
-
Hello everybody.
I'm work on ethernet gateway.
I used from meny library for run this but it gives errors.
Can you please run this code in your Arduino ide and if it work ,send me your libraries?
It's very important to me.
code EthernetGateway
-
Welcome to the forum @Rez
That code looks like it was made for MySensors 1.x, which quite old.
Try the latest version instead: https://www.mysensors.org/build/ethernet_gateway
-
Thank you Mr @mfalkvidd .
I found the library of this code but got the following error.
-
Mr @mfalkvidd
I want to recive data from this code:meter
how i get this data with your ethernet gateway code:GatewayW5100.ino
can you Please fill in (void setup) and (void presentation) and (void loop) according to the meter code? I thank you very much.
-
@Rez sorry, that sketch is way too complex for me to understand.
-
thanks Mr @mfalkvidd .
Suggested Topics
-
MySensors Ethernet Gateway RPi form-factor (W5100 module)
OpenHardware.io • 3 Mar 2016, 08:13 • openhardware.io 3 Mar 2016, 08:13 -
NRF24L01 and rfm69 in one gateway
General Discussion • 29 Dec 2016, 10:32 • Omemanti 29 Dec 2016, 14:46 -
iBoard - Ethernet Gateway - Check Wires
Troubleshooting • 13 Feb 2015, 20:38 • tbully 16 Feb 2015, 17:22 -
Is MQTT Necessary? or, Use Case for MQTT?
Controllers • 28 Mar 2016, 01:12 • TRS-80 9 Jan 2020, 09:01 -
completely remove MySensors integration for HA and start over
Home Assistant • 5 Dec 2022, 22:28 • OldSurferDude 6 Dec 2022, 22:27 -
How to change Radio ID on Raspberry Pi Gateway with RFM 69
Troubleshooting • 1 Jul 2020, 20:12 • Stefan_NE 2 Jul 2020, 11:05 -
MQTT Gateway + wi-fi instead of ethernet
Controllers • 13 Mar 2015, 08:29 • vladimir 14 Mar 2015, 09:13
