@alexsh1
Hi Alex,
I tested the Sanity check on the the Arduino sensor node, and status came back OK. However I could get this to work on the Raspberry Pi, seems like this function is not yet supported. At least I couldn't find any info on it using the "./configuration -h".
I don't have a AMS1117 available so I can test that.
I connected my Arduino Nano and NRF24L01+ to the Raspberry Pi via USB, that would really well. So I might just use this solution instead as I see little benefit of connecting the NRF24L01 directly to the GPIO pins on the Raspberry Pi.
Next step is to start building some battery powered sensors that I can use, and get MyController setup properly.
Wow, great! Its alway nice to see others using my work too. Your code improvement seem to be very helpful too.
I have most recently also integrated this directly into my gateway build (see here). I am still struggling with code there though.
Really interesting, maybe I could build something cool around the Arduino HeatpumpIR (https://github.com/ToniA/arduino-heatpumpir) library I've been building. Right now I'm integrating it with Domoticz (http://www.domoticz.com/forum/viewtopic.php?f=34&t=7179#p69647).
I'm an ex-Microsoft employee from Finland (resigned about a month ago).
Hi @talhatec ,
The remote controls work well. 4 months ago I installed a new battery and from time to time I press the button to check if they continue with battery, they sleep correctly.
I remain pending to change the RF antenna for a better one and to improve some failures in the connectors of the battery that at the moment are very fragile (the pad has little copper).
The casing can be purchased online
https://www.ebay.com/itm/Bluetooth-4-0-GPS-Tracker-Locator-Smart-Alarm-Anti-lost-Device-Self-Portrait-SC/401394156488
For now the project is stopped, I want to test the Aqara sensors (I buy them this week), in any case the domotics is now my lowest priority.
Hi!
I have the same problem as terxw. allpcb.com is missing the "NC drill date". Unfortunately I am not able to create this on my own. Can anybody upload this file?
Thanks
