The send-function is used to send updates to the controller, in your case the physical-button-switch-change. Doing the send, does not control anything on the node itself.
@nicomedia I stumbled on this doing a google search. Just wondering if you are still trying to get your Sonoff's working with your Vera controller? If so, I have written a blog post on the subject. It uses a different firmware called ESP Easy and an HTTP Switch plugin on the Vera rather than MySensors. but it works rather well for me. Here is the link to the blog post:
https://dan.bemowski.info/2017/07/04/using-a-sonoff-with-espeasy-and-vera/
I use this in conjunction with some MySensors wall switches that I built.
https://dan.bemowski.info/2017/06/11/my-start-into-open-source-hardware/
@yury said in Wall Socket Insertable Node:
Looks cool! Do you have experience with capacities switches? I did not play much with them. afraid to use close to AC interference though...
You need to use a capacitive IC with active shielding, basically you have an extra electrode around your touch electrode and the touch IC will compare capacitive change of the touch electrode with capacitive change from the shield electrode. If the change is due to electrical interference then both electrodes will be changed in a similar way and the IC will not trigger.
My current roller roller Shutter switch are two pushed buttons up and down. No stop button. When release the push button up or down, the shutter will stop. WIll it be compatible with this board or will i have to change the buttons ?