💬 simple MySensors MultiSensor Board
openhardware.io last edited by openhardware.io
Robbie_ last edited by Robbie_
Hi, i printed ur boards, its cool thank you :-). However i'm having some trouble getting the radio working properly.
It only works good when i touch the antenna..
Im not using the ceramic 0.1uf cap. and the 10k resistor..
is the 0.1uf cap. needed for the radio to work stable?
And yes, im using the 4.7 - 47uF Capacitor (Elko)
Thanks again, every cool board
dirkc last edited by
I always suggest to use caps wherever you power the board, because it "levels" or "balances" the current so it has more "stability". The resistor connected to reset is always needed as "pull-up", without that, the processor will either reboot or be unstable.