Weather station DHT22, BMP185, SI1145

[jesse]

This project uses an Arduino pro mini 3.3v 8mhz. The power and pin 13 LEDs have been desoldered to save battery life. The battery used is a 18650 lithium and a single 18650 battery bank.

XAMPP server: http://www.jbcse.com/weather-graph.php

All sensors and the transceiver powered through an IRL520 mosfet. The Jeelib power library is used to make the arduino sleep for about 10 seconds which uses about 1 mA. Measuring takes about 2 seconds and uses 5 mA.

Sensors used: DHT22, BMP185, SI1145
Transceiver used: NRF24L01+

[RJ_Make]

@jesse Nice work

[epierre]

@jesse How do you make a difference between visible and IR light ?

I've made a bit the same, I'm now working on soil mosture+temp and leaf moisture. The solar flare is missing to have a pro weather station...

[jesse]

@epierre The SI1145 can measure IR, visible, and UV light: https://learn.adafruit.com/adafruit-si1145-breakout-board-uv-ir-visible-sensor/overview

[Yveaux]

@jesse said:

SI1145

This is a very nice sensor indeed! Didn't know about it.
Think I'm gonna sample some.

[doesel33]

Very interesting projekt. Can you show your sketch? I try to build nearly the same, but have some problems with SI1145.

[Catalina Alquinga]

Saludos disculpa como realizastes las coneciones del BMP185 Y EL SI1145

[AWI]

@Catalina-Alquinga said:

Saludos disculpa como realizastes las coneciones del BMP185 Y EL SI1145

Google translate from Spanish??:: Greetings apology as its connections realizastes the BMP185 AND SI1145

[Catalina Alquinga]

@AWI
I 'm doing a similar project prodias help me make connections as your project and how to perform with I2C