Sample Door SW does not compile !

[IOS_IOT]

Hello everybody,

I wish you a wonderful year 2015 .

I have a problem when I try to compile the "BinarySwitchSensor Example".
I receive the following message :

In file included from /Users/guest/Documents/Arduino/MySensorGW/libraries/MySensors/MySensor.h:28,
from MySensorDoorSW.ino:4:
/Users/guest/Documents/Arduino/MySensorGW/libraries/MySensors/utility/RF24.h:51: error: ISO C++ forbids declaration of 'SoftSPI' with no type
/Users/guest/Documents/Arduino/MySensorGW/libraries/MySensors/utility/RF24.h:51: error: expected ';' before '<' token

I currently work with the release 1.5.5 of the Arduino IDE

Somebody could help me ?

Thanks by advance

Alain

[funky81]

I can compile and use door sample from mysensor.
the difference is that i'm using old arduino ide 1.0.5, while you're using 1.5.5.
possible to change the ide ?

[m26872]

I compile the example sketch fine with IDE 1.5.7.
Do you have uncommented the #define SOFTSPI in RF24_config.h for some reason (eg programming your gateway)?. If so comment it back again.