💬 MDMSNode "Lighting" Rev 1.1
-
-
-
Nice Work! When you plan to publish the PCB design?
-
@artipi At the first I should check the new design (ordering pcbs + wait delivering (3 weeks) + solder and test (3-4 days). In my opinion, it will be in September.
-
Ok, thanks!
-
-
Now i can understand the modifications on the rev1.1. Do you detect in the firmware if the light is off or on with the ACS712 ? Does the push switch from the wall will still be acting independently of this Mysensors board?
Light status (on/off) will update when the physical switch will be pressed?
-
@jeremushka I developed this device and added functionality to it that can be useful for many users of MySensors technology. Personally, I use only the lamp on / off function. I do not use the wall switch, current flow detecting, etc. I can only theoretically answer on your questions. For confirmation it, is necessary to implement all this in the sketch.
@jeremushka said in
MDMSNode "Lighting" Rev 1.1:
Do you detect in the firmware if the light is off or on with the ACS712 ?
It is possibility.
@jeremushka said in
MDMSNode "Lighting" Rev 1.1:
Does the push switch from the wall will still be acting independently of this Mysensors board?
Wall switch must connect directly to terminal block. No other connections should be.
@jeremushka said in
MDMSNode "Lighting" Rev 1.1:
Light status (on/off) will update when the physical switch will be pressed?
This needs to be controlled by the sketch.
-
@kalina, Thanks. So it will not work for my configuration. Wall switch (push button) is already installed. No possibilities to draw more electrical wires.
Moreover, if i put the board near the light, i have just the Neutral and the return wire from the wall switch. No Live wire to power on the mysensors board.
I think in my ase the best way is to manage everything in my garage in the electrical main board where all the wires are mapped. I can get L + N for mysensors power supply. And i can continue to reuse the original wall switch independently of the Mysensors board.
Suggested Topics
-
💬 MSMDLed
OpenHardware.io • 27 Dec 2018, 11:02 • openhardware.io 27 Dec 2018, 11:02 -
💬 RFM69 Livolo 2 channels 1 way EU switch(VL-C700X-1_Ver_C2)
OpenHardware.io • 5 May 2017, 14:26 • openhardware.io 19 Sept 2017, 06:35 -
Porting MySensors to non-arduino platforms (like ARM mbed)
Hardware • 9 Oct 2016, 11:20 • nono8223 9 Oct 2016, 11:31 -
💬 Jukebox design journal
OpenHardware.io • 24 Apr 2017, 11:17 • openhardware.io 23 Jul 2017, 21:02 -
💬 Teleinfo with parasitic power
OpenHardware.io • 7 Feb 2017, 12:54 • openhardware.io 10 Feb 2017, 18:43 -
💬 Easy/Newbie PCB for MySensors
OpenHardware.io • 7 Jan 2016, 22:06 • openhardware.io 23 Oct 2022, 10:54 -
💬 RFM69 Livolo 1 channel 1 way EU switch(VL-C700X-1_Ver_C2)
OpenHardware.io • 8 May 2017, 16:04 • openhardware.io 12 May 2017, 22:01 -
Setting up the 2nd RF24 network..
Hardware • 28 Apr 2019, 07:06 • pvoj 28 Apr 2019, 09:33