@C.r.a.z.y.
yeah.... those are VERY bouncy.
are you interrupt triggering or just using a state change?
post your code, let's make sure you have it de-bounced enough.
@dzungpham0703
I buy them on Aliexpress:
https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180706102504&SearchText=HTTM
If you apply hot air it is easy to take off the white "double sided tape" and the plastic.
Good to know, indeed my setup is working now with stable libraries thanks to this helpful community.
I'll go back later to development libraries to see if I'm able to work with it as well.
Hi @blackchart,
Unfortunately, all devices are sold out. Further production is possible only when ordering more than 10 devices (in this case, I also can modify the device to suit your needs).
@sebdetours said in MDMSPanel "Nextion":
Did you take a standart case that you cut out?
Hi @sebdetours, yes. This is G1910 (Gainta) box. See drawing attached to projet files.
