OpenHardware.io

@magpern said in 💬 MyQTherm - replace IQTherm heating thermostat: I actually am thinking somewhat in the line of discontinuing mysensors network. It is to much, hacks and tricks, and I forget everything in between sessions. I gave up more than once, also over period of years. Recently I came back again and decided to focus on the heart of the issue, getting my radios working and once you get over that, it starts to get fun again. I can respect if you already moved on to something else. I even cheated on MySensors and installed some 433 mhz devices too :D , just to get something working. You have to keep your interest in HA alive in the meantime. But the reward is great when you get MySensors working. There are "easier" solutions like Tasmota, 433mhz, etc. but not as customizable as MySensors. MySensors is for when you outgrow those other solutions and need something more custom.

@YuryPol as far as I know, all licenses require some form of documentation. In all cases I know of, this is documented with the license or on the licenses official site.

@Andrew-Currie Downloaded KiCad and used it to import jBoard2.brd and output .gbr files via Plots plus the .drl file. Checked using GerbView and uploaded to PCBWay. Hopefully this will now work...

@zmatokan said in 💬 NModule: @Nca78 Are you still working on this pcbs? i think it would be great to add a version that supports HiLink 220ac->5dc module on powerboard. No I'm not working on NModules anymore, I have a few old nodes using atmega/nrf24 but I switched to NRF5 for "basic" nodes now, and to ESP32 for more "advanced" stuff. NModule was designed for beginner and simple/riskless use, so I don't think adding high voltage option is a great idea, it's better to use an external power supply and connect the output to the powerboard.

I recently build successfully a mysensor node based on an Arduino Uno, a Robolink IR sensor and a Robolink DHT11 sensor. The last two from an Elektor sensor kit ever bought for my son when he was still interested by electronics :wink: . My controller is Home Assistant, so I did a merge of the given MySensors example sketch and the Home Assistant example sketch together with the DHT11 sketch. The airco is a Samsung one, so in the sketch you will find these defines uncommented. Replace by your airco manufacturer. People interested in building one, can find my sketch on https://github.com/ericvb/MySensorsArduinoSketches @ToniA a big thanks for the work to decode all these IR sequences!

Thanks for sharing. How did you get low current while still checking messages frequently enough? Or do you only check for messages every hour or so?

Hello Berk, Is it possible for you to share your schematic for this project please? especially the power part?

Brother can we "PAUSE" the video with this remote when we making video recording, please reply brother..

@jeremushka Same software can be used. The pin definitions need to be changed though.

@scalz May I request you to share your code for it please. Thanks

Hi, I complied your code for NRF51822 chip but I am getting the following errors at compile Arduino: 1.8.11 (Mac OS X), Board: "MyBoardNRF5 nRF51822, 16 kB RAM, 256 kB flash (xxaa), None, Crystal Oscillator" WARNING: library LIS2DW12-master claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on nRF5 architecture(s). /Users/puneit/Google Drive/MySensor/NRF51822/doorsensor/doorsensor.ino: In function 'void board_Init()': doorsensor:417:3: error: 'NRF_NFCT' was not declared in this scope NRF_NFCT->TASKS_DISABLE = 1; ^ doorsensor:419:13: error: 'struct NRF_UICR_Type' has no member named 'NFCPINS' NRF_UICR->NFCPINS = 0; ^ doorsensor:421:3: error: 'NRF_SAADC' was not declared in this scope NRF_SAADC ->ENABLE = 0; ^ doorsensor:422:3: error: 'NRF_PWM0' was not declared in this scope NRF_PWM0 ->ENABLE = 0; ^ doorsensor:423:3: error: 'NRF_PWM1' was not declared in this scope NRF_PWM1 ->ENABLE = 0; ^ doorsensor:424:3: error: 'NRF_PWM2' was not declared in this scope NRF_PWM2 ->ENABLE = 0; ^ doorsensor:425:3: error: 'NRF_TWIM1' was not declared in this scope NRF_TWIM1 ->ENABLE = 0; ^ doorsensor:426:3: error: 'NRF_TWIS1' was not declared in this scope NRF_TWIS1 ->ENABLE = 0; ^ Multiple libraries were found for "Wire.h" Used: /Users/puneit/Library/Arduino15/packages/sandeepmistry/hardware/nRF5/0.6.0/libraries/Wire Not used: /Users/puneit/Documents/Arduino/libraries/Wire Multiple libraries were found for "SPI.h" Used: /Users/puneit/Library/Arduino15/packages/sandeepmistry/hardware/nRF5/0.6.0/libraries/SPI Not used: /Users/puneit/Documents/Arduino/libraries/SPI exit status 1 'NRF_NFCT' was not declared in this scope Invalid library found in /Users/puneit/Documents/Arduino/libraries/ESP8266SdFat: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/ESP8266SdFat Invalid library found in /Users/puneit/Documents/Arduino/libraries/SoftwareSerial: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/SoftwareSerial Invalid library found in /Users/puneit/Documents/Arduino/libraries/ArduinoHwNRF5-master: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/ArduinoHwNRF5-master Invalid library found in /Users/puneit/Documents/Arduino/libraries/arduino-nRF5-master: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/arduino-nRF5-master Invalid library found in /Users/puneit/Documents/Arduino/libraries/ArduinoBoards-master: no headers files (.h) found in /Users/puneit/Documents/Arduino/libraries/ArduinoBoards-master This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.

I'm curious about PICs. Do you like PICs more than AVRs, and if so, why?