@JahFyahh - I still haven't managed to et round to it. I've been really busy since this project and its still hectic here. I'm sure i read a few reviews somewhere, here or google. Not sure.
The choice of MOSFET can be tricky. Seems that irlz44n was discontinued so you may need to find one adapted to the voltage and current you want to handle.
In all the cases you need to get a logic MOSFET too, meaning that they are fully open usually around 1 to 3V.
Also I'm sort of confused as it seems to me that L7812CV is a Voltage regulator, not a MOSFET. So if you are actually using that in the MOSFET spot it will definitively not work.
Especially if you are handling high current or voltage I would recommend using one from a reputable source for your MOSFET, I recently switched from mouser / digikey / aliexpress to mostly use http://www.arrow.com as you get free regular shipping, event if you order a couple of components (no affiliation to them whatsoever).
Hello,
I want to build this project. But I don't need to power it by batteries. Has anyone the circuit diagram (in FrizIng?)
I have also the problem, that I can't see, on the breadboard picture of this project where the red wire from the battery ends after the connection to the Arduino?
Does it go to the FET and the R7?
Can anyone help me?
I think you need to post a clear drawing or photos of the setup and the code you are using.
I donlt know what you mean by "connecting the current in series" nor what "AC regulator" you are using or what "thermal serial currenr" is.
@magpern said in MyQTherm - replace IQTherm heating thermostat:
I actually am thinking somewhat in the line of discontinuing mysensors network. It is to much, hacks and tricks, and I forget everything in between sessions.
I gave up more than once, also over period of years. Recently I came back again and decided to focus on the heart of the issue, getting my radios working and once you get over that, it starts to get fun again.
I can respect if you already moved on to something else. I even cheated on MySensors and installed some 433 mhz devices too , just to get something working. You have to keep your interest in HA alive in the meantime. But the reward is great when you get MySensors working.
There are "easier" solutions like Tasmota, 433mhz, etc. but not as customizable as MySensors. MySensors is for when you outgrow those other solutions and need something more custom.