@magpern said in MyQTherm - replace IQTherm heating thermostat:
I actually am thinking somewhat in the line of discontinuing mysensors network. It is to much, hacks and tricks, and I forget everything in between sessions.
I gave up more than once, also over period of years. Recently I came back again and decided to focus on the heart of the issue, getting my radios working and once you get over that, it starts to get fun again.
I can respect if you already moved on to something else. I even cheated on MySensors and installed some 433 mhz devices too , just to get something working. You have to keep your interest in HA alive in the meantime. But the reward is great when you get MySensors working.
There are "easier" solutions like Tasmota, 433mhz, etc. but not as customizable as MySensors. MySensors is for when you outgrow those other solutions and need something more custom.
The choice of MOSFET can be tricky. Seems that irlz44n was discontinued so you may need to find one adapted to the voltage and current you want to handle.
In all the cases you need to get a logic MOSFET too, meaning that they are fully open usually around 1 to 3V.
Also I'm sort of confused as it seems to me that L7812CV is a Voltage regulator, not a MOSFET. So if you are actually using that in the MOSFET spot it will definitively not work.
Especially if you are handling high current or voltage I would recommend using one from a reputable source for your MOSFET, I recently switched from mouser / digikey / aliexpress to mostly use http://www.arrow.com as you get free regular shipping, event if you order a couple of components (no affiliation to them whatsoever).
I recently build successfully a mysensor node based on an Arduino Uno, a Robolink IR sensor and a Robolink DHT11 sensor. The last two from an Elektor sensor kit ever bought for my son when he was still interested by electronics .
My controller is Home Assistant, so I did a merge of the given MySensors example sketch and the Home Assistant example sketch together with the DHT11 sketch.
The airco is a Samsung one, so in the sketch you will find these defines uncommented. Replace by your airco manufacturer.
People interested in building one, can find my sketch on https://github.com/ericvb/MySensorsArduinoSketches
@ToniA a big thanks for the work to decode all these IR sequences!
@zmatokan said in NModule:
@Nca78 Are you still working on this pcbs? i think it would be great to add a version that supports HiLink 220ac->5dc module on powerboard.
No I'm not working on NModules anymore, I have a few old nodes using atmega/nrf24 but I switched to NRF5 for "basic" nodes now, and to ESP32 for more "advanced" stuff.
NModule was designed for beginner and simple/riskless use, so I don't think adding high voltage option is a great idea, it's better to use an external power supply and connect the output to the powerboard.
I have published all the documentation in a Github repository. If someone wants to make PCBs, I recommend that you wait a little longer until you receive my PCBs and try them.
https://github.com/giltesa/SmartHome