this kind of optic fiber is probably only plastic so for a full DIY , you can use also fishing wire with a big power led or an old chistmass tree optic fiber lighted.....
@bisschopsr said in BlackCircle Sensor - High "WAF" Temp/Hum. sensor:
Hi All,
Like the design thinking of this, although an older topic I did manage to get me one of these dishes. After taking it apart, I have one question that came to mind. Is the ventilation in the dish enough for the humity sensor? Is there any experience with that after running this sensor for a while?
Thx
Ralph
Hello, yes I think it's enough, in fact there's much more ventilation than in many commercial sensors which only have a small hole. But it's a good test to make, I'll try to compare to a sensor out of it's enclosure to see if there's significant difference or delay.
@yoonie said:
For the pro mini version, should i create another Openhardware project, or should i put it here, in the already existing project?
Might be better to create a new project as they uses a different set of design files.
I apologize for the questions and how simple they may be, as Im new to this community but very intrigued with the creativity and endless possibilities.
My next issue is the humidity seems to be off. It has read as high as 115% humidity. Is this normal or should I be considering a correction? If so, how would I enter a correction. Its a little odd considering it states that the accuracy is much tighter than that.
